Your degree timeline
Now in progress — · 0cr

Using Seneca Polytechnic's Grading Scheme

Absolute Grading

Verified against the university’s official grading policy senecapolytechnic.ca — the grade table below is the one the institution publishes. Verified Aug 2026. How we verify

Seneca Polytechnic Grading Scale

See grade values & mark ranges
Grade GPA Value Marks Range
A+ 4.00 90.00 - 100.00
A 4.00 80.00 - 89.00
B+ 3.50 75.00 - 79.00
B 3.00 70.00 - 74.00
C+ 2.50 65.00 - 69.00
C 2.00 60.00 - 64.00
D+ 1.50 55.00 - 59.00
D 1.00 50.00 - 54.00
F 0.00 0.00 - 49.00

Report an error in this scheme

Seneca Polytechnic grading scheme — grade, GPA value and marks range
The grade scale as an image — handy for saving or sharing.
Your GPA updates as you type — no submit button needed.

GPA Results

Term GPA
—
on a 0.00 - 4.00 scale
0.00 4.00
0 credits 0% avg

Performance Summary

Performance summary will appear once you add courses.

Course Details

Course Credits Grade Grade Value Points
Add a course with credits and a grade to see your GPA
Total Credits: 0 Total Points: 0.00
Aiming for a specific cumulative GPA? Try the Seneca Polytechnic Target GPA Calculator Work out the average GPA you'll need next semester to reach your goal.

How grading works at Seneca Polytechnic

Seneca Polytechnic grades courses on a percentage basis throughout the term; at the end of the term your course percentage converts to a letter grade on a 0.0–4.0 scale, with A+ capped at 4.0 (not a 4.3-point scale). Both A+ (90–100%) and A (80–89%) carry the maximum 4.0 grade points, even though they're separate letter grades.

Unless a course syllabus states otherwise, the minimum passing grade is a D (50–54%, 1.0 grade point) for certificate, diploma, advanced diploma, graduate certificate, bachelor's and honours bachelor's courses. Master's degree courses set a higher bar — a minimum passing grade of B, unless the syllabus states otherwise.

Source: Grading Policy §1 'Grade designations'; Student Progression and Promotion Policy §1 — verified Aug 2026

How Seneca Polytechnic calculates your GPA

Your Grade Point Average (GPA) is calculated by dividing the total points earned by the total units of credits attempted — points come from multiplying each course's grade-point value by its assigned units. Seneca provides three GPA figures: a Term GPA (all graded courses in a single term), a Cumulative GPA (all completed graded courses across your studies), and a Program GPA (all successfully completed graded courses required for your specific program).

Repeating a course: if you repeat a course, the highest grade achieved counts as the grade of record and is what's calculated into your program GPA — but every attempt still appears on your transcript, and all grades count toward your term and cumulative GPAs.

Several transcript designations — AEG, ATT, AUD, CTC, DNC, EXM, EXC, SAT, TC, UN, WD, and *** (officially withdrew) — are noted on your transcript but do not affect your GPA at all.

Source: Grading Policy §1, §4 'Grade Point Average (GPA)'; Student Progression and Promotion Policy §5 'Course attempts' — verified Aug 2026

Academic standing and probation at Seneca Polytechnic

Seneca issues an academic standing at the end of every term:

  • Good — term GPA of 2.0 or higher (2.5 for bachelor's programs, 3.0 for master's programs) and no failed courses in the term.
  • Satisfactory — term GPA of 2.0 or higher (2.5 / 3.0) with two or fewer failed courses.
  • Probationary — term GPA below 2.0 (2.5 / 3.0), or three or more failed courses.
  • Withdrawn — may be assigned after two consecutive terms without satisfactory standing.

Students start every program in Good standing. If you're required to withdraw for academic reasons, you may be eligible for readmission after a minimum of one semester, but you'll need to meet probation requirements to continue once readmitted.

To progress in a certificate, diploma, advanced diploma or graduate certificate program you need a minimum term GPA of 2.0; bachelor's programs need 2.5; master's programs need 3.0 — though your program area has discretion to let you continue below the floor.

Source: Student Progression and Promotion Policy §1 'Progression and promotion requirements', §2 'Academic standing and progression' — verified Aug 2026

What GPA you need to graduate from Seneca Polytechnic

The minimum graduating GPA depends on your credential:

  • 2.0 — certificate, diploma, advanced diploma, graduate certificate
  • 2.5 — bachelor's degree, which must also include a minimum 2.5 GPA in your main field of study and a minimum 2.0 GPA in breadth courses
  • 3.0 — master's degree

Source: Student Progression and Promotion Policy §6 'Graduation' — verified Aug 2026

Honours and the President's Honour List at Seneca Polytechnic

At graduation, diploma, certificate, bachelor's and master's students earn Honours standing with a graduating GPA of 3.6 to 3.9, and High Honours standing with a graduating GPA of 4.0.

During your studies, the President's Honour List recognizes full-time students (and students with an equivalent full-time accommodation through Accessible Learning Services) who achieve a term GPA of 4.0. Continuing Education students qualify with a term GPA of 4.0 across a minimum of four courses over three consecutive terms.

Source: Grading Policy §5 "President's Honour List"; Student Progression and Promotion Policy §6 'Graduation' — verified Aug 2026

Transfer credit at Seneca Polytechnic

Courses in a program may be accounted for through transfer credits, prior learning assessment and recognition, exemption, or course substitution. Two related transcript designations exist: TC (Transfer credit) and CTC (Conditional transfer credit) — neither affects your GPA calculation.

Source: Grading Policy §1; Student Progression and Promotion Policy §1 — verified Aug 2026

Frequently asked questions

What grading scheme does Seneca Polytechnic use?
The university uses the Absolute Grading scheme (percentage-based) on a 0.0–4.0 scale with 9 grade levels: A+ = 4.00 (90–100%), A = 4.00 (80–89%), B+ = 3.50 (75–79%), B = 3.00 (70–74%), C+ = 2.50 (65–69%), C = 2.00 (60–64%), D+ = 1.50 (55–59%), D = 1.00 (50–54%), F = 0.00 (0–49%).
Where does this Seneca Polytechnic grade scale come from?
From the university's official grading policy, published at senecapolytechnic.ca. The grade table on this page is the one the policy sets out, verified Aug 2026.
Does Seneca Polytechnic use a 4.33 GPA scale?

No. Seneca's grade points run on a 4.0 scale, with A+ capped at 4.0 rather than valued above it — A+ (90–100%) and A (80–89%) both carry the maximum 4.0 grade points.

Source: Grading Policy §1 table — verified Aug 2026

What is the lowest passing grade at Seneca Polytechnic?

D (50–54%, 1.0 grade point) is the lowest passing grade for certificate, diploma, advanced diploma, graduate certificate, bachelor's and honours bachelor's courses, unless a course syllabus sets a different bar. Master's degree courses require a minimum of B to pass. Below the passing floor is an F (0.0 grade point, 0–49%).

Source: Grading Policy §1 table; Student Progression and Promotion Policy §1 — verified Aug 2026

What happens if you repeat a course at Seneca Polytechnic?

The highest grade you achieved across all attempts becomes the grade of record used in your program GPA. Every attempt still appears on your transcript, and all attempts count toward your term and cumulative GPAs. Unless stated otherwise, you may attempt a course up to three times.

Source: Student Progression and Promotion Policy §5 'Course attempts' — verified Aug 2026

What GPA do you need to graduate from Seneca Polytechnic?

It depends on your credential: a minimum graduating GPA of 2.0 for certificates, diplomas, advanced diplomas and graduate certificates; 2.5 for bachelor's degrees (with sub-floors of 2.5 in your major and 2.0 in breadth courses); and 3.0 for master's degrees.

Source: Student Progression and Promotion Policy §6 'Graduation' — verified Aug 2026

What term GPA puts you on academic probation at Seneca Polytechnic?

A term GPA below 2.0 (below 2.5 for bachelor's programs, below 3.0 for master's programs) — or failing three or more courses in the term — results in Probationary standing.

Source: Student Progression and Promotion Policy §2 'Academic standing and progression' — verified Aug 2026

How do I convert term GPA to cumulative GPA at Seneca Polytechnic?
Your cumulative GPA is the credit-weighted average of your term GPAs across every semester: (term GPA₁ × credits₁ + … + term GPAₙ × creditsₙ) ÷ (credits₁ + … + creditsₙ). Save each semester to the tracker on this page, by course or as a quick term GPA + credits entry, and it works out your cumulative GPA on every save, edit and delete.
Is this Seneca Polytechnic GPA calculator free, and is my data private?
Yes. GPAWise is free, with no signup, and your courses and saved semesters stay in your browser: nothing is sent to our servers. "Clear all tracker data" on the tracker wipes them at any time.

GPAWise is an independent tool and is not affiliated with, endorsed by, or sponsored by Seneca Polytechnic. University names and trademarks are the property of their respective owners. Grading data is reproduced for reference — always verify with your institution.

Other feedback or bug reports

Calculator not working right? UI confusing? Missing a feature? Tell us here.

Found an error in the university's grading scheme (wrong GPA value, mark range, missing grade)? Use Suggest a correction instead — admins can review and apply those directly.